Integra DPS-10.5 - Manual (Page 70)

70
Configuring the DPS-10.5 —Continued
PAL Output Setting (Australian model only)
With this setting you can specify how the DPS-10.5 out-
puts video signals when playing NTSC format
discs .
Auto (default)
Use this option if your TV or projector supports PAL
and NTSC. When you play a PAL disc, the video
output will be PAL. When you play an NTSC disc,
it’ll be NTSC. The DPS-10.5 does not convert the
format.
PAL
Use this option if your TV doesn’t support NTSC
playback, or the picture is distorted when watching
NTSC discs. The DPS-10.5 will convert NTSC for-
mat video to a PAL-compatible format known as
Mod PAL or 60 Hz PAL .
Notes:
• This setting can be changed only when playback is
stopped.
• PAL and AUTO can also be selected from the front
panel. With the DPS-10.5 turned on, while holding
down the Next [
] button, press the [Standby/On]
button to select “Auto” or “PAL.”
Digital Out/Digital1 (i.LINK)
With these settings you can determine how the DPS-10.5
outputs digital audio from its i.LINK sockets and DIGI-
TAL 1 AUDIO OUTs. The options you choose will
depend on the type of component that you connect to the
DIGITAL 1 AUDIO OUTs.
■ Dolby Digital Out
With this setting you can configure the DIGITAL 1
AUDIO OUTs to output Dolby Digital audio as it is or to
downmix it into 2-channel PCM.
Dolby Digital (default)
Choose this option if you’re connecting a component
with a built-in Dolby Digital decoder.
Dolby Digital > PCM
Choose this option if you’re connecting a stereo hi-fi
amp with a digital input, an AV receiver with a built-
in Dolby Pro Logic decoder, or an external D/A
converter.
■ DTS Out
With this setting you can configure the DIGITAL 1
AUDIO OUTs to output DTS audio as it is or to down-
mix it into 2-channel PCM.
DTS (default)
Choose this option if you’re connecting a component
with a built-in DTS decoder.
DTS > PCM
Choose this option if you’re connecting a stereo hi-fi
amp with a digital input or an external D/A converter.
Notes:
• When playing the DTS audio of a DTS CD, set the CD
Audio Setup setting to DTS (see page 76).
■
MPEG Out
With this setting you can configure the DIGITAL 1
AUDIO OUTs to output MPEG audio as it is or to down-
mix it into 2-channel PCM.
MPEG
Choose this option if you’re connecting a component
with a built-in MPEG decoder.
MPEG > PCM (default)
Choose this option if you’re connecting a stereo hi-fi
amp with a digital input or an external D/A con-
verter.
■ Digital Out
With this setting you can turn the DIGITAL 1 AUDIO
OUTs on or off. Depending on how you connect the
DPS-10.5 to your other components, this can be useful in
certain situations.
On (default)
DIGITAL 1 AUDIO OUTs are on.
Off
DIGITAL 1 AUDIO OUTs are off.
Notes:
• This setting has no effect on the analog audio outputs.
3 When you’ve finished, press the
[Enter] button.
The setting is stored.
Use the same procedure to set the other
parameters, pressing the [Enter] button
when you’ve set each one.
Press the [Setup] button to exit the
onscreen setup menu.
Audio Menu
Remote controller
Enter