Interphase Tech CONDOR 4221 - Manual (Page 111)

99
APPENDIX A
SPECIFICATIONS
VMEbus Specifications
DTB Master A16, A24, A32, D08 (EO), D16, D32: BLT, D64: BLT
DTB Slave A16, D08 (EO), D16, D32
Requester Any of R(0-3), Static RWD, ROR
Interrupter Any of I(1-7), Dynamic D08 (O)
Power Requirements
Dual AUI Ethernet Motherboard 5.70A typical @ +5V DC (+/- 5%)
6.20A maximum @ +5V DC (+/- 5%)
7mA maximum @ +12V DC (+/- 5%) See note.
30mA maximum @ -12V DC (+/- 5%)
Dual 10BaseT Ethernet Motherboard 5.70A typical @ +5V DC (+/- 5%)
6.20A maximum @ +5V DC (+/- 5%)
7mA maximum @ +12V DC (+/- 5%) See note.
30mA maximum @ -12V DC (+/- 5%)
Dual AUI Daughter Card 0.80A typical @ +5V DC (+/- 5%)
0.60A maximum @ +5V DC (+/- 5%)
0.00A maximum @ +12V DC (+/- 5%) See note.
DUAL 10BaseT Daughter Card 0.80A typical @ +5V DC (+/- 5%)
0.60A maximum @ +5V DC (+/- 5%)
0.00A maximum @ +12V DC (+/- 5%) See note.
Single Channel Ethernet Daughter Card 0.70A typical @ +5V DC (+/- 5%)
0.50A maximum @ +5V DC (+/- 5%)
0.00A maximum @ +12V DC (+/- 5%) See note.
NOTE
Each Condor AUI port provides +12 volts at the cable connector
(DB15). An additional.5 amps (maximum) of +12 volts may be required
for each AUI transceiver (or box) connected to the Condor.