I-Tech Company CMS 6R4 Series - Manual (Page 41)

5-19
Confi guration
5.5.2. Network Parameters Menu
The Network Parameters Menu is used to select the IP Address and other
network parameters.
• Web Browser Interface: Click the "Setup" button to access the Setup
Menus, and then click the "Network Parameters" button. The Network
Parameters Menu will be displayed as shown in Figure 5.9.
• Text Interface: Type /N and press [Enter]. The Network Parameters
Menu will be displayed as shown in Figure 5.10.
Notes:
• Although the Web Browser Interface and Text Interface both allow
configuration of the same network parameters, note that for the
Text Interface, the IP Security feature is configured via a separate
submenu. For more information on IP Security, please refer to
Section 5.5.2.1.
• In the Web Browser Interface, both Telnet Parameters and Web
Server Parameters are defined via separate menus, which are
accessed using the buttons on the left hand edge of the Setup menu.
In the Text Interface, these parameters are defined via the Network
Parameters Menu.
• Settings for network parameters depend on the configuration of
your individual network. Contact your network administrator for
appropriate settings.
The Network Parameters Menus allow the following parameters to be defined.
Except where noted, all parameters listed here are available via both the Web
Browser Interface and Text Interface.
Network Parameters:
• IP Address: Defines the IP address for the CMS-6R4 unit.
(Default = 192.168.168.168.)
• Subnet Mask: Defines the Subnet Mask for the CMS-6R4 unit.
(Default = 255.255.255.0.)
• Gateway Address: Defines the Gateway Address for the CMS-6R4 unit.
(Default = undefined.)
• Send MSS: Defines the Maximum Segment Size that will be sent by the
CMS-6R4. (Default = 536.)
• IP Security: Sets up the IP Security feature. Please refer to
Section 5.5.2.1 for a detailed description of the IP Security feature.