IntraServer Technology 5232E - Manual (Page 36)

36
Appendix D: Adapter Specifications
ITI-5232E Four Port 10/100 Ethernet PCI adapter
Bus Interface PCI 32-bit bus master
Hardware Interrupts ITI-5232E-N - supports shared interrupts
ITI-5232E-O/U – does not support shared interrupts
Base I/O Addresses Assigned by BIOS
Data Transfer Rates Up to 800 Mbps in Fast full duplex mode
Power Requirements PCI Universal 3.3 or 5 volts at 17 watts
Environmental
Operating Temperature
0
°
to 55
°
C
Humidity 5% to 85% non-condensing
Altitude 3000m maximum
Ethernet Standards IEEE 802.3 10 Base-T
IEEE 802.3u 100 Base-T
Certifications FCC Class B
CE Class B
Electrical Connections (4) RJ-45 female
Physical Dimensions 9.0” X 4.125”
Network Speeds Supported
per Ethernet Network
Segment 10 Mbps
20 Mbps Full duplex
100 Mbps
200 Mbps Full duplex
Indication LEDs Link
Activity
100TX link