IntraServer Technology 5232E - Manual (Page 8)

8
Connectors and Indicator LEDs
The ITI-5232E provides four 8-pin Modular Jack (MJ) connectors for connection with
your network. Each of these four ports supports either Twisted Pair Category 3 or 5 cable
for 10Mb/s connections, or Category 5 cable for 100Mb/sec operation.
Figure 1 shows the ITI-5232E Adapter connectors and indicator LEDs.
Port 0
Port 1
Port 2
Port 3
1
2
3
4
5
6
7
8
Port 0
Port 1
Port 2
Port 3
Figure 1 Connectors and Indicator LEDs
Table 2 describes the ITI-5232E Four Port Fast Ethernet Adapter connectors and indicator LEDs.
Reference Component Description
❶
Channel 0 8-pin MJ Connector 10/100 Mb/s twisted-pair network
connector for Channel 0
❷
Channel 1 8-pin MJ Connector 10/100 Mb/s twisted-pair network
connector for Channel 1
❸
Channel 2 8-pin MJ Connector 10/100 Mb/s twisted-pair network
connector for Channel 2
❹
Channel 3 8-pin MJ Connector 10/100 Mb/s twisted-pair network
connector for Channel 3
❺
Channel 0 Indicator LEDs 100 Mb/s (Left LED)
Activity (Center LED)
Link (Right LED)
❻
Channel 1 Indicator LEDs 100 Mb/s (Left LED)
Activity (Center LED)
Link (Right LED)
❼
Channel 2 Indicator LEDs 100 Mb/s (Left LED)
Activity (Center LED)
Link (Right LED)
❽
Channel 3 Indicator LEDs 100 Mb/s (Left LED)
Activity (Center LED)
Link (Right LED)
Table 2 Connections and Indicator LEDs