iSimple Handheld PC 680/680e User Manual
Page 111
Chapter 6 | Accessing e-mail and the Web | 105
3. In the HP dialup window, confirm the user name
and password you use to log on to your network,
and then select the modem you will use to dial the
call.
4. Check the telephone number, and then tap Dial. A
progress message appears to tell you when you are
connected to your network, and then an icon
appears in the taskbar while you remain connected.
After you are connected to your network, use the Inbox
program to send and receive e-mail or use Pocket Internet
Explorer to browse your corporate intranet or the Web. For
more information, refer to the Sending, receiving, and
processing your e-mail and Browsing the Web or
your intranet with Pocket Internet Explorer sections
in this chapter.
To disconnect from the network
1. Double-tap the HP connection icon in the status
area of the taskbar.
2. In the HP dialup window, tap Disconnect.
Connecting to corporate e-mail and network
resources onsite
If you want corporate e-mail and Internet service only
(with no access offsite), you will need:
An installed network interface card (NIC)that is
properly configured with the IP address of your DNS
and WINS servers (your network administrator can give
you this information)