Integra DPS-6.5 - Manual (Page 42)

42
Initial Settings menu
The Initial Settings menu provides audio and video out-
put settings, parental lock settings, and display settings,
among others.
If an option is grayed out it means that it cannot be
changed at the current time. This is usually because a
disc is playing. Stop the disc, then change the setting.
Notes:
• In the table on next pages, the default setting is shown
in bold: other settings are shown in italics.
• The Digital Audio Out settings only need to be set if
you have connected the digital output of this player to
an AV receiver, or other equipment.
• Check the operating instructions supplied with your
other equipment to see which digital audio formats it’s
compatible with.
• Some settings, such as TV Screen, Audio Language
and Subtitle Language may be overridden by the DVD
disc. Often these settings can also be made from the
DVD disc menu.
Using the Initial Settings menu
On Standby
Open/
Close
Play Mode
Display
1 2 3
4 5 6
7 8 9
0 Clear
Dimmer
Top Menu Menu
Return Setup
Audio Angle Subtitle Zoom
Stop Play Pause
Down Up
T V Control
T V/ Video Channel
On/
Standby
Volume
RC - 583DV
Enter
Enter
Setup
1 Press Setup and select “Initial Set-
tings”.
2 Use the cursor buttons and Enter
to select the setting and option
you want to set.
All the settings and options are explained
on the following pages.
Setup
Initial Settings
Enter
DPS-6.5.book Page 42 Thursday, August 5, 2004 3:27 PM