ICP DAS USA MSM-6226 - Manual (Page 205)

Publication date: March., 2011
Revision A1
193
11 102400 3776 DISABLE 102400
12 102400 3776 DISABLE 102400
13 102400 102400 DISABLE 102400
14 102400 102400 DISABLE 102400
15 102400 102400 DISABLE 102400
16 102400 102400 DISABLE 102400
17 102400 102400 DISABLE 102400
18 102400 102400 DISABLE 102400
19 102400 102400 DISABLE 102400
20 102400 102400 DISABLE 102400
21 102400 102400 DISABLE 102400
22 102400 102400 DISABLE 102400
23 102400 102400 DISABLE 102400
24 102400 102400 DISABLE 102400
25 1024000 1024000 DISABLE 1024000
26 1024000 1024000 DISABLE 1024000
set ingress-rate
Syntax:
set ingress <range> <rate>
Description:
To set up the ingress-rate of the ports.
Argument:
<range>:syntax 1,5-7, available from 1 to 26
<rate>: 64-1024000(Kb).
port 1-24: 64-102400(Kb); port 25-26: 64-1024000(Kb)
Possible value:
<range>: 1 to 26
<rate>: 64-102400(Kb) for port 1-24; 64-1024000(Kb) for port 25-26
Example:
FEL2P-SW26 (bandwidth)# set ingress 1-16 100
FEL2P-SW26(bandwidth)# show
Port Ingress Rate(Kb) Egress Rate(Kb) Storm Type Storm Rate(Kb)
snmp mode
stp
====== ================== ================= ============ ================
Enter into system mode
1 102400 102400 DISABLE 102400
2 102400 102400 DISABLE 102400
3 102400
102400 DISABLE 102400
4 102400 102400 DISABLE 102400
5 102400 102400 DISABLE 102400
6 102400 102400 DISABLE 102400
7 102400 102400 DISABLE 102400
8 102400 3776 DISABLE 102400