IBM Janam XM60 - Manual (Page 16)

XM60 User Manual
3-3 Janam Technologies LLC
After receiving your five-digit key code, follow these steps to enable 2D
scanning.
1. Go to the MS Windows icon > settings > XM60 panel.
2. Tap XM60 panel icon.
3. Select scanner tab.
4. Enter your five-digit key code > unlock.
• A successful unlock notification will appear.
5. Press X to close the screen.
Note: Remember to keep a record of your five-digit key code.
The unlock code will be maintained in the unit’s system after a soft reset,
but it will need to be re-entered after a hard reset.
Enable ScanCapture feature
The ScanCapture demo enables you to capture normal and intelligent images.
To take a single image:
1. Click single.
2. A preview appears on the screen.
3. Click save.