IBM xSeries 330 - Manual (Page 102)

94 Hardware Maintenance Manual: xSeries 330
5962 (IDE CD-ROM configuration
error)
1. Run Configuration/Setup
2. CD-ROM Drive
3. CD-ROM Power Cable
4. IDE Cable
5. System Board
6. Battery
8603 (Pointing Device Error) 1. Pointing Device
2. System Board
00019501 (Processor 1 is not functioning
- check VRM and processor LEDs)
1. Processor 1
2. System Board
00019502 (Processor 2 is not functioning -
check VRM and processor LEDs)
1. Processor 2
2. System Board
00019701 (Processor 1 failed) 1. Processor 1
2. System Board
00019702 (Processor 2 failed) 1. Processor 2
2. System Board
00180200 (No more I/O space
available for PCI adapter)
1. Run Configuration/Setup
2. Failing Adapter
3. System Board
00180300 (No more memory above
1MB for PCI adapter)
1. Run Configuration/Setup
2. Failing Adapter
3. System Board
00180400 (No more memory below
1MB for PCI adapter)
1. Run Configuration/Setup
2. Move the failing adapter to slot 1 or 2
3. Failing Adapter
4. System Board
00180500 (PCI option ROM
checksum error)
1. Remove Failing PCI Card
2. System Board
00180600 (PCI adapter self test) 1. Run Configuration/Setup
2. Move the failing adapter to slot 1 or 2
3. Failing Adapter
4. System Board
00180700, 00180800 (General PCI
error)
1. System Board
2. PCI Card
01295085 (ECC checking hardware
test error)
1. System Board .
2. Processor
01298001 (No update data for
processor 1)
1. Ensure all processors are the same stepping level and cache size.
2. Processor 1
01298002 (No update data for
processor 2)
1. Ensure all processors are the same stepping level and cache size.
2. Processor 2
Error Code/Symptom FRU/Action