Imperial DS1 - Manual (Page 17)

- 16 -
7. General Viewing Function
The following describes the basic functions of your Imperial DS1 while watching satellite TV or
listening to satellite radio.
While watching, the current channel information will be shown on the bottom of the screen if you
press the INFO button on the RCU.
7.1 Select Channel
If you want to select channel, use CH key on the
front panel or PR+, PR- key on the RCU or
numeric keys.
In addition to the above normal function, Imperial
DS1 provides more convenient channel change
function.
While watching, press OK key on the RCU. A
channel list will be displayed on the right side of
the screen. If you press EXIT key, the channel list
will disappear.
To select a channel, go up or down this channel
list and place the cursor on a desired channel.
Then, press OK key to watch the selected
channel.
If you press key on the RCU, the channel list will scroll page by page.
7.2 Previous Channel Recall
Press PR key on the RCU to move to the previous channel you watched.
7.3 TV & Radio Mode
While viewing a TV channel, press the
TV/RADIO key on the RCU to toggle between TV
and Radio modes.
TV & VCR Mode
The TV/AV key on the RCU lets you change the
mode from satellite to TV or VCR.
Press once to move the TV mode.
Press twice to move to VCR mode.
Press three tomes to move back to satellite
mode.
7.5 Channel Information
Every time you change channels, you will receive program information for a few seconds.
While watching the channel you can see the current channel information at anytime by pressing
the INFO key on the RCU.
Note: Channel information will be displayed for 6 seconds by default and will disappear. You can
adjust the display time interval from 2 to 12 seconds.