Invacare Van Seat PHWH93 - Manual (Page 14)

SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
Van Seat 14 Part No 1143195
Inspect/Adjust Monthly
❑ Ensure all fasteners are secure.
❑ Inspect for any loose hardware on the wheelchair.
❑ Inspect the seat positioning strap for signs of wear. Replace if worn or damaged.
❑ Ensure that the buckle on the seat positioning strap latches. Replace if necessary.
❑ Verify that the hardware that attaches the seat positioning strap to the seat frame is
secure and undamaged. Replace if necessary.
Inspect/Adjust Periodically
❑ Ensure adjustable height arms operate and lock securely.
❑ Ensure arm pivot points are not worn and/or loose. Replace if necessary.
❑ Ensure armrest pads sit flush against arm tubes.
❑ Ensure seat and/or back upholstery have no rips and do not sag. Replace if necessary.
❑ Ensure seat release latch is not worn. Replace if necessary.
❑ Clean upholstery and armrests.
❑ Check that wiring is routed and secured properly to ensure that wiring does NOT
become entangled and damaged.
❑ Inspect electrical components for signs of corrosion. Replace if corroded or damaged.
❑ Check that all labels are present and legible. Replace if necessary.
Troubleshooting
NOTE: For troubleshooting information and explanation of error codes, refer to the wheelchair base
owner’s manual and the individual Electronics Manual supplied with each wheelchair.