Jura Capresso IMPRESSA F9 63942R - Manual (Page 21)

• Press the P button to return to SELECT PRODUCT .
Please note: In order for the machine to turn off automatically it
must be in the
SELECT PRODUCT mode. If you leave the
machine in programming mode (red arrows showing), or in any
other mode, the machine will not turn off automatically.
18j. SETTING LANGUAGE
The F9 is set to ENGLISH. You can change the display to
German, French, Italian, Spanish, Portuguese or Dutch.
• Press the P-Button.
• Touch the right arrow until the display shows
LANGUAGE
ENGLISH .
• Touch ST@RT .
• Touch either arrow repeatedly to select the desired language.
• Touch
ST@RT to confirm.
• Press the P button to return to SELECT PRODUCT .
18k. CUP COUNTER
The cup counter shows the total number of coffees made.
• Press the P-Button.
• Touch the right arrow until the display shows
SUPPLIED... .
It will show the total number of coffees brewed.
• Touch any of the cup symbols or coffee buttons and the
display shows how often this selection has been used.
• Press the P button to return to SELECT PRODUCT .
19. CARE AND MAINTENANCE
19a. FILL WATER
When the display shows
FILL WATER , no more coffee can be
made until you fill the water container. The water container will
never be completely empty. The low water floatation device
(Fig. 8.4) activates the FILL WATER indicator when there are
about 10 oz. of water left.
• Remove water tank, rinse and fill with fresh water and replace.
19b. EMPTY TRAY / EMPTY GROUNDS
Used coffee grounds are collected in the used coffee container
(Fig. 2.19). If the display shows
EMPTY GROUNDS or EMPTY
TRAY , no more coffee can be made until you empty the used
coffee container.
• Carefully lift and remove drawer since there is water in it (Fig. 21).
The display shows TRAY MISSING .
Important: Do NOT unplug the machine while you are emptying
the coffee grounds.
• Empty the used coffee container and the drawer.
• Push the drawer back into the machine (Fig. 22). The display
still shows TRAY MISSING .
• Place the used coffee container on the tray and insert back
into the machine (Fig. 23). The display shows SELECT
PRODUCT and you may now continue brewing coffee.
19c. FILL BEANS
When the display shows
FILL BEANS , open the bean container
lid and add beans (Fig. 6).
Please note: The message
FILL BEANS will disappear after
making the next cup of coffee.
Attention: If the display shows
FILL BEANS and there are
ample beans in the bean container, stir the beans so they flow
into the grinder (chapter 8).
We recommend cleaning the bean container from time to time
with a dry cloth before you refill beans (please make sure the
machine is turned off when cleaning.)
21.