Jura Capresso IMPRESSA F9 63942R - Manual (Page 23)

• Open the ground coffee lid and drop in one white cleaning
tablet (Fig. 24).
• Push the Rinse button. The display shows MACHINE
CLEANING . The cleaning program will dispense hot water in
intervals through the coffee spout into the drawer.
• When finished, the display shows EMPTY TRAY and the
machine "beeps".
• Lift and remove the drawer. Empty the used coffee container
and drawer and replace. The display shows SELECT
PRODUCT indicating the machine is now ready to brew
coffee again.
20b. DECALCIFYING PROCEDURE
The machine has an integrated decalcifying program. When the
display shows
MACHINE SCALED SELECT PRODUCT it is
time to decalcify the machine. You can still make coffee howev-
er, it is highly recommended that you decalcify the machine
within the next 3 to 4 days.
Please note: If you use the Claris water cartridge and the dis-
play shows
MACHINE SCALED SELECT PRODUCT , then your
cartridge function is not activated. Follow the instructions in
chapter 16a to program the Claris Cartridge function.
Important: The decalcifying program must not be interrupted.
DECALCIFYING AGENT: Only use our special decalcifying
tablets. For supplies see chapter 22.
CAUTION: Never use vinegar or any other decalcifying agent.
This might damage internal parts of the machine.
1. Turn off machine and let cool down for at least one hour.
Empty Water tank.
2. With the machine off, push and hold the Rinse Button (Fig. 3b)
until the display shows
EMPTY TRAY .
3. Remove and empty the drawer and replace complete
assembly (Fig. 23).
Important: Even if the drawer is empty, you still need to remove
it for approx. 20 seconds and then replace it. The display shows
AGENT IN TANK PRESS MAINT. .
4. Dissolve three of the large, square tablets in 16 oz. of water
and pour this mixture into the water tank.
Please note: Do not use more than 16 oz. of water.
5. Replace water tank.
6. Place a container (at least 16 oz.) underneath the frother.
The displays still shows AGENT IN TANK PRESS MAINT .
7. Push the Rinse Button. The machine will pump the mixture
through the frother in intervals. Then it pumps the mixture
(internally) into the drawer. During this procedure the display
shows
MACHINE DESCALED . When this cycle is finished
the machine beeps and the display shows EMPTY TRAY .
8. Remove the container from underneath the frother. Carefully
lift and remove the drawer, empty and thoroughly rinse all
parts and replace. The display shows
FILL WATER .
9. Remove the water tank, rinse thoroughly, fill with cold fresh
water (approx. 16 oz.) and replace.
10. Place a container (at least 16 oz.) underneath the frother.
The display shows PRESS MAINT. FILL WATER .
11. Push the Rinse Button. First the machine will pump hot
water in intervals through the frother to remove any
decalcifying mixture. During this procedure the display
shows
MACHINE DESCALED . When the cleaning cycle is
finished the machine beeps and the display shows
23.