JVC HR-J449MS - Manual (Page 43)

43
SET TAPE SPEED
4
Press (VN/LD) to set the tape speed.
RETURN TO NORMAL
SCREEN
5
Press OK.
● Repeat steps 1 – 5 for each additional programme.
ENGAGE RECORDER’S
TIMER MODE
6
Press AUTO. The recorder turns off automatically.
NOTE:
To Delay The Stop Time . . .
. . . press +DUREE after pressing OK in step 3. Each time you
press, the Stop time is delayed by 5 minutes (meaning that 5
minutes of recording time is added). You can easily compensate
for anticipated programme schedule delays this way.
To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press HEBDO (NUMBER key
“9”) for weekly serials or QTDN (NUMBER key “8”) for daily
serials (Monday – Friday). Either "HEBDOMADAIRE" or
"QUOTIDIEN" appears on the screen. Pressing the button again
makes the corresponding indication disappear.
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "MEMOIRE DE PROGRAMMATION PLEINE" appears on
screen and "PLEIne" appears on the front display panel. To
record the extra programme, you must first cancel any unneces-
sary programmes (
੬
pg. 46).
q
1 2
4 5
3
6
8
0
7 9
2
4
1
3
AUTO
+DUREE
QTDN.
HEBDO
AUTO
OK