JVC HR-J449MS - Manual (Page 45)

45
ENTER PRESET POSITION
6
Press CHAINE +/–.
● If you’re not receiving PDC (Programme Delivery
Control), press : PDC (NUMBER key “7”) to set to
"A." (
੬
pg. 47).
SET TAPE SPEED
7
Press (VN/LD) to set the tape speed.
RETURN TO NORMAL
SCREEN
8
After confirming all information is correct, press OK
and the normal screen appears.
● Repeat steps 1 – 8 for each additional programme.
ENGAGE RECORDER’S
TIMER MODE
9
Press AUTO. The recorder turns off automatically.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 8, press HEBDO (NUMBER
key “9”) for weekly serials or QTDN (NUMBER key “8”) for
daily serials (Monday – Friday). Either "HEBDOMADAIRE" or
"QUOTIDIEN" appears on the screen. Pressing the button again
makes the corresponding indication disappear.
q
1 2
4 5
3
6
8
0
7 9
2
4
1
3
AUTO
QTDN.
HEBDO
AUTO
OK
:PDC
VN/LD
CHAINE
VN
NOTES:
● You can programme this recorder to timer-record as many as
8 programmes. If you try to programme the recorder to record
a ninth, "MEMOIRE DE PROGRAMMATION PLEINE" appears
on screen and "PLEIne" appears on the front display panel. To
record the extra programme, you must first cancel any
unnecessary programmes (
੬
pg. 46).
● To timer-record a satellite broadcast through a satellite receiver
connected to the AV2 ENTREE/DECODEUR connector on the
back of the recorder, in step 6 above, set "CHAINE" to "AUX2"
by pressing CHAINE +/–. Before the selected programme
begins, select the appropriate channel on the satellite receiver,
then set the receiver's timer. If your satellite receiver doesn't
have a timer, leave the unit's power switched on.
– P1 –
DEBUT FIN
21:00 = 22:00
VN M.
DATE CHAINE
25.12 1
TF1
[+/–] =
[MENU] : SORTIE