Janome MEMORY CRAFT 10001 - Manual (Page 70)

69
R
Step1
required, then press " ".
Sew to Length
Auto
Restart for the same size.
Different size Cancel
R
Step2
then press " ".
Sew up to start
position,
Auto
4
3
5
Sew up the left side stopping at the end of the
Buttonhole Mark. Press the Reverse Button.
3 Buttonhole Mark
4 Reverse Button
Depress the Foot Control. The machine will
automatically tack and sew down the right side
of the buttonhole.
Stop the machine when you are directly
opposite the Starting Point.
Press the Reverse Button.
5 Starting Point
Keep the Foot Control depressed. The
machine will bartack, lock the stitches and
automatically stop when the buttonhole is
completed.
To make the next buttonhole, position the fabric
and step down on the Foot Control.
To sew the next buttonhole at a different size
press the key.
NOTES:
• The machine will sew another buttonhole
identical to the first one each time you step
down on the Foot Control.
• To cut the buttonhole opening, refer to the
instructions on page 60.
Cancel
R
Step3
Machine stops when
BH is completed.
Auto