Janome MEMORY CRAFT 10001 - Manual (Page 80)

79
Adjust
3.5 2.50 4.2
Default
Cancel
OK
Adjust
Straight Stitch
2 2 3 3
6
6
1/14
61 60 59 58 62
63 64 65 66 67
68 69 70
A
Auto
A Z
1
2
1
2
3 4 5
6
7
8
In the Decorative Stitch Mode, some utility
stitches, such as straight stitches, zigzag stitch,
overedge stitch are included as
programmable patterns.
The number beside the pattern image on the
straight stitch key denotes stitch counts of a
programmable unit.
Press key to select the Decorative Stitch
Mode.
Function Keys
1 Needle Up/Down Key : Press key to
bring the needle bar up or down when
stopping the machine.
2 Adjust Key : Press key to open the
Setting window.
3 Zigzag Width : Press the Zigzag Width
or keys to change the stitch
widths.
4 Stitch Length : Press the Stitch Length
or keys to increase/decrease the
stitch length.
5 Thread Tension : Press the Thread Tension
or keys to increase/decrease the
thread tension.
6 Default key : When you press key, all
settings in the adjusting window will return
to default (the same settings as when you
purchased the machine).
7 Cancel key : When you press key,
the adjusting window will close and the
setting remains.
8 OK key : Press key. The setting is
registered and the screen returns to the
previous window.
NOTE:
• Refer to page 75 for operation of other
function keys.
Decorative Stitches
Cancel
OK
Adjust
Default