John Lewis JLBIOS662 - Manual (Page 30)

• Connection type: E14.
These bulbs are available from your local
Repair agent.
To replace the faulty bulb:
1. Ensure the oven is disconnected
from the electrical supply.
2. Turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with
the new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
Something not working
If the oven is not working correctly, please
carry out the following checks, before
contacting your local Service Force Centre.
Important! If you call out an engineer to a
fault listed below, or to repair a fault caused
by incorrect use or installation, a charge will
be made even if the appliance is under
guarantee.
SYMPTOM SOLUTION
The oven does not come on. • Check that both a cooking function and temperature
have been selected.
• Check the fuse and ensure the socket switch or the
switch from the mains supply to the oven are ON.
• Check that the Demo mode has not accidentally been
activated. To deactivate it, follow the instructions given
in the relevant paragraph.
The oven light does not come on. • Select a function with the oven function control knob.
• Check the light bulb, and replace it if necessary (see
"Replacing the Oven Light").
It takes too long to finish the dishes, or they
are cooked too fast. • The temperature may need adjusting
• Refer to the cooking function sections and to any
cooking chart provided.
30