John Lewis JLBIOS662 - Manual (Page 7)

Before using for the first time
Warning! Remove all packaging,
both inside and outside the oven,
before using the oven.
When the oven is first connected to the
electrical supply, the display will automatically
show 12:00 and the symbol flashes.
Ensure the correct time of day is set before
using the oven.
Setting the clock:
1. Press Time function button and, while the
symbol is flashing, set the correct time
of day by pressing buttons “ ” or “ ”
The time arrow symbol will disappear
about 5 seconds after the correct time is
displayed.
2. As soon as the symbol stops flashing,
press Time function button twice.
Then, proceed as described in point 1.
Before the first use, the oven should be heated
while empty.
1. Press the button to switch on the oven.
2. Press button Oven function twice and
select the "Conventional Cooking"
function
.
3. Set the temperature to 250°C by using the
button “ ”.
4. Allow the oven to run empty for
approximately 45 minutes.
5. Open a window for ventilation.
This procedure should be repeated with the
"Fan Cooking"
and "Full Grill" function
for approximately 5-10 minutes.
During this time, an unpleasant odour may be
emitted. This is absolutely normal. It is caused
by manufacturing residues.
Once this operation is carried out, let the
oven cool down, then clean the oven cavity
with a soft cloth soaked in warm soapy water.
Before cooking for the first time, carefully
wash the oven accessories as well.
To open the oven door, always hold the
handle in the centre, until it is fully open.
7