JVC BD-X200E - Manual (Page 44)

E-71
English
Registering IN/OUT/CHAPTER POINT from external edit lists
External edit lists can be read by the EDL MANAGER screen of this machine, and used as edit data in the REMOTE CONTROL
screen.
Notes
● Loading of external edit lists is possible when CHAPTER CREATION from the RECORDER MENU (2/2) screen is set to
MANUAL.
● EDL that can be read in : In SLAVE mode CSV files or Sony9100 format files.
In MASTER mode CSV files only. CSV files have the same name for the MASTER or SLAVE
modes, but the files are not compatible. Use the correct format files. (Refer to page 70 “Details of
the MASTER mode CSV files”)
● Chapter marks are inserted at GOP intervals (i.e., 15 frames). It will not be possible to insert chapter marks that are closer
together than this interval.
Ⅵ To enter the state where edit lists can be transferred to the BD-
X200.
1. Move the cursor to the EDL item you wish to register on the EDL
MANAGER screen, then press the “Enter” key.
● The selected EDL item will be highlighted.
2. Move the cursor to the IMPORT item on the EDL MANAGER screen,
then press the “Enter” key on the keyboard.
● The external edit list will be read into the EDL MANAGER screen.
3. To use the read edit list, select the LOAD item on the EDL MANAGER
screen, and press the “Enter” key.
● The edit list is set in the REMOTE CONTROL screen.
Operation EDL
EDL01
S
M
EDL02
EDL03
EDL04
EDL05
EDL06
EDL07
EDL08
EDL09
EDL10
BACK
SAVE
IMPORT
LOAD
DELETE
NAME
MANAGER
EDL item
IMPORT item
LOAD item
Ⅵ Example 1: Loading a CSV-format EDL (Slave mode)
IN POINT OUT POINT EXIT
REMOTE CONTROL SCREEN ( DV SLAVE )
1
:
4
7
h : m : s f
2
:
5
8
3
6
9
h : m : s f : h : m : s f
CHAPTER MANUAL
BITRATE 8.0 Mbps DISC REMAIN 000 min
EDL
TC CANCEL
ADJ
FINALIZE
00:00:00:00
00:10:00:00
00:40:00:00 00:20:00:00 00:30:00:00
01:10:00:00
: : :
: : : : : : : : :
00:50:00:00
JVC CSV
IN POINT
OUT POINT
Chapter1
Chapter2
Chapter3
Chapter4
Chapter5
00:00:00:00
01:00:00:00
00:10:00:00
00:20:00:00
00:30:00:00
00:40:00:00
00:50:00:00
EDL
EDL01
S
M
EDL02
EDL03
EDL04
EDL05
EDL06
EDL07
EDL08
EDL09
EDL10
BACK
SAVE
IMPORT
LOAD
DELETE
NAME
MANAGER
EDL MANAGER screen
LOAD item IMPORT item
REMOTE CONTROL screen
● Line returns at the end of each line.
● Maximum of 98 chapter marks.
Ⅵ Example 2: Loading a Sony9100-format (Slave mode)
Recorder-In and Recorder-Out time codes are read from the X-source and Y-source rows, and these are then set as the
In Point, Out Point, and chapter marks for editing.
EDIT RECORDER-IN RECORDER-OUT
0001 00:00:00:00 00:10:00:00
00:10:00:00 00:20:00:00
00:20:00:00 00:20:00:00
0002
0002
0003 00:30:00:00 00:40:00:00
00:40:00:00 00:50:00:00
00:40:00:00 00:50:00:00
0004
0004
00:50:00:00 01:00:00:00
00:50:05:00 01:00:00:00
0005
0005
EDL
EDL01
S
M
EDL02
EDL03
EDL04
EDL05
EDL06
EDL07
EDL08
EDL09
EDL10
BACK
SAVE
IMPORT
LOAD
DELETE
NAME
MANAGER
IN POINT OUT POINT EXIT
REMOTE CONTROL SCREEN ( DV SLAVE )
1 :
4
7
h : m : s f 2 :
5
8
3
6
9 h : m : s f : h : m : s f
CHAPTER MANUAL
BITRATE 8.0 Mbps DISC REMAIN 000 min
EDL LOAD
TC CANCEL
ADJ
FINALIZE
00:00:00:00
00:10:00:00
00:40:00:00 00:20:00:00 00:30:00:00
00:50:00:00 00:50:05:00
01:00:00:00
: : : : : : : : :
IMPORT item LOAD item
IN point register CHAPTER point register
Already registered Register in
CHAPTER point
EDL MANAGER screen
Register in
OUT point
REMOTE CONTROL screen
E-72
Synchronous Recording
VIDEO AUDIO IN
IN
OUT IN OUT CH1
CH2 REMOTE
USB
DV IN/OUT
SIGNAL LAN GND DC 19V
4dB 8dB
INPUT LEVEL LINE
Y/C
Recording Video & Audio from a Non-Linear Editor with DV Terminal
By connecting a non-linear editor featuring a DV terminal to this DVD recorder, audio and video processed using the editor can be
easily recorded to a disc. In this case, the BD-X200 will be controlled by commands from the non-linear editor, and these commands
will be communicated via the DV terminal.
Signal Connections
● Connect the DV IN/OUT terminal on the rear of your BD-X200 to the DV terminal on the non-linear editor using a DV (IEEE1394)
cable. One of the commercially-available cables indicated above should be used for this purpose.
● Connect the DVD recorder’s VIDEO LINE OUT and AUDIO OUT terminals to the monitor’s video in and audio in terminals.
● The REMOTE CONTROL screen is operated from the keyboard or with a mouse. Connect the keyboard or mouse to the USB
terminal in the rear of this machine.
Setup Procedures
● Insert a recordable disc into your BD-X200.
Settings
BD-X200 : Set REMOTE SELECT from the REMOTE MENU screen to DV (SLAVE).
● When REMOTE SELECT is set to DV (SLAVE), the REMOTE CONTROL (DV
SLAVE) screen will appear. This screen can be used to set editing points and
chapter marks. Refer to page 74 for details regarding usage of the REMOTE
CONTROL (DV SLAVE) screen.
Monitor
REMOTE CONTROL (DV SLAVE) screen
Non-linear editor
AUDIO OUT
DV IN/OUT terminal
MENU
REMOTE SELECT DV(SLAVE)
OFF REC CONTROL
FF/REW REM FF/REW MODE
REMOTE MENU
REMOTE MENU screen
IN POINT OUT POINT EXIT
REMOTE CONTROL SCREEN ( DV SLAVE )
1
:
4
7
h : m : s f
2
:
5
8
3
6
9
h : m : s f : h : m : s f
CHAPTER MANUAL
BITRATE 8.0 Mbps DISC REMAIN 000 min
EDL
TC CANCEL
ADJ
FINALIZE
00:00:00:00
00:00:00:00
00:25:00:00
00:40:00:00 00:15:00:00
00:30:00:00
00:45:00:00 00:20:00:00
00:35:00:00
00:50:00:00
00:10:00:00
DV terminal
(video, audio, and control signals)
DV cables:
VC-VDV204 (2 m, 4P-4P) from JVC
VC-VDV206 (2 m, 4P-6P) from JVC
Rear panel
Notes
● When pressing and holding the REC
button more than 2 seconds while the
DVD recorder is stopped, encoded
output images can be checked while the
button is being held.
● Press the “R” key on the keyboard to
go to the EE screen.
VIDEO OUT