Samson SM10 - Manual (Page 5)

SM10 Owner's Manual 1
Introduction
The Samson SM10 rack mount mixer is a versatile tool for many sound appli-
cations. The SM10 mixer features eight independent stereo line input chan-
nels, and includes two channels with XLR microphone preamps. There are also
two additional line inputs with stereo 1/4” jacks and level controls that can
be used to daisy-chain SM10 mixers together. The SM10 features a multitude
of signal routing options, with Monitor (Pre-Fade), EFX (Post-Fade), and Mix
B sends on Channels 1-8. The Master section of the SM10 features expanded
monitoring capabilities. The headphone output and meter bridge can be
selected to monitor the MON out, EFX out, Mix B, or Main output. There is also
an extra MON output with level control for quick patching to the MON send
without having to go to the rear panel. Built into a single space 19-inch rack
with internal power supply, the SM10 is reliable for any installation and rug-
ged enough to be used on the road.
In these pages, you’ll find a detailed description of the features of the SM10
rack mount mixer, as well as a guide to its control panel, instructions for setup
and use, and full specifications. You’ll also find a warranty card enclosed.
Please don’t forget to fill it out and mail it in so that you can receive online
technical support, and so that we can send you updated information about
this and other Samson products in the future. Also, be sure to check out our
website (www.samsontech.com) for information about our full product line.
With proper care, your SM10 will operate trouble-free for many years. We
recommend you record your serial number in the space provided below for
future reference.
Serial number: ____________________________________________
Date of purchase: __________________________________________
Should your unit ever require servicing, a Return Authorization number (RA)
must be obtained before shipping your unit to Samson. Without this number,
the unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-
372-6766) for an RA number prior to shipping your unit. Please retain the
original packing materials and if possible, return the unit in the original carton
and packing materials. If you purchased your Samson product outside the
United States, please contact your local distributor for warranty information
and service.