Controls and functions – Samson SM10 User Manual

Page 8

Advertising
background image

SM10

4

Controls and Functions

The following section details each part of the SM10 controls and functions.

1. VOLUME – This knob controls the volume

of channel inputs and is used to continu-

ously adjust the loudness of the various

signals being blended together at the

Main Outputs. There is a detent at the 12

o’clock position of the knob, which indi-

cates unity gain.

Moving the knob counterclockwise from

the 12 o’clock position causes the signal

to be attenuated. Moving it clockwise

from the 12 o’clock position causes the signal to be boosted.

For best signal-to-noise ratio, all Volume controls for channels carrying

signal should generally be kept at or near the 12 o’clock position. Channels

that are unused should have their Volume controls kept fully counterclock-

wise at their minimum level.

2. BALANCE – When the both inputs of a channel are connected, the left

input signal is automatically panned hard left and the right input signal is

automatically panned hard right. In this case, the Balance knob controls

the relative levels of the paired input signals. When the knob is placed at

its center detent position, both signals are at equal strength. When moved

left of center, left input signal remains at the same strength but the right

input signal is attenuated. When the knob is moved right of center, the

left input signal remains at the same strength but the right input signal is

attenuated.

When only the left input is connected, the Balance knob functions as a

constant level Pan control, allowing you to continuously place the incom-

ing signal anywhere in the left-right stereo field.

3. MON (Monitor) Send – The MON send knob allows you to route the signal

to the MON outputs. The MON send is pre-fader so the signal is unaffected

by the position of the channel Volume control. These sends are usually

used to create a separate mix for a monitor system. When the MON send

knob is at the 12 o’clock center detent position, the signal is routed with

unity.

2

1

3

4

5

6

7

8

9

11

12

13

10

14

15

16

17

18

19

20

21

22

23

24

25

Advertising