Sprint Nextel SCP-7050 User Manual
Page 38
22
Section 2A: Phone Basics
Installing the Battery
To install the Li-Ion battery:
1.
Insert the battery into the lower end of the battery
compartment on the back of the phone.
2.
Gently press the top end of the battery downward until
the battery is securely seated in the battery
compartment.
3.
Slide the battery cover upward until you hear it snap into
place.
4.
Slide the battery cover release lever to the left to lock it
into place.
Removing the Battery
To remove your battery:
1.
After ensuring that the power is off (so that stored
numbers and messages are not lost), slide the battery
cover release lever to the right.
2.
Slide the battery cover downward and remove it.
3.
Use your thumbnail to lift and then remove the battery.
WARNING
Do not handle a damaged or leaking Li-Ion battery as
you can be burned.