Kompernass KH 1410 - Manual (Page 5)

- 3 -
Items supplied
Cyclone Vacuum cleaner
Suction hose
Telescopic tube
Floor tool
Accessory holder
Crevice tool
Upholstery brush
Operating instructions
Order card
Technical data
Power supply: 220–240 V~/50 Hz
Power rating: min: 1400 W
max: 1800 W
Protection class: II
Appliance description
1 Dust collector carrying grip
2 Unlock button for housing lid
3 Exhaust filter cover
4 Storage bracket for floor tool
5 On/Off switch
6 Vacuum cleaner carrying grip
7 Suction power regulator
8 Foot button for power cable rewind
9 Power cable with power plug
0 Storage bracket for floor tool
q Housing cover
w Selector switch for carpet/hard surface
e Floor tool
r Storage hook
t Dust collector
z Suction pipe connector
u Height adjuster for telescope tube
i Storage hook
o Telescope tube
p Accessory bracket
a Suction hose
s Secondary air regulator
d Hand grip
f Crevice tool
g Upholstery brush (rotatable through 360°)
Unpacking and assembly
Unpacking
• Unpack the appliance and the accessories and
check that all listed items are available.
Assembly
Attention!
Assemble the appliance with the plug 9 disconnec-
ted from the power supply. The appliance could be
inadvertantly switched on.
1. Insert the suction pipe connector z into the
socket on the vacuum cleaner until the locking
device engages.
2. Insert the hand grip d into the upper end of
the telescope tube o until it is firmly seated.
3. Place the desired tool (floor tool e , crevice
tool f or upholstery brush g , see chapter
„Changing tools“) on the lower end of the
telescope tube
o .
4. Adjust the telescope tube o to the desired
length: Press the height adjustor u down. Pull
the telescope tube o apart on the hand grip
d . When you have the desired length release
the height adjuster u . Pull the telesopic tube o
a little further until it audibly engages.
The Cyclone Vacuum Cleaner is now ready for use.
IB_KH1410_E2687_GB_LB4+5 21.01.2008 10:23 Uhr Seite 3