Liebert RCM8DO - Manual (Page 21)

Section 3: RCM8 Menus
The RCM8 Main Menu has 12 options that let you set
configuration parameters.
Accessing the Setup
Menus
After you have installed your RCM8 system you must set the
software parameters using the RCM8 Main Menu and Sub-
menus. The diagram on the following page describes the RCM8
menu system.
You can access the Main Menu from a local computer connected
to the RCM8 or remotely via computer/modem.
To access the RCM8 Main Menu from a LOCAL
COMPUTER:
1. Turn on the computer and the RCM8.
2. Press Space Bar to begin the login process.
3. Type the RCM8 password, then press ENTER to access the
Main Menu. The factory-set password is “RCM8”.
4. At any time during the configuration, press Esc to back up
through the menus to return to the Main Menu:
LOG ON:****
RCM8 TERMINAL MENU
1. Configuration
2. Setup Input Options Menu
3. Alarms Review
4. Alarms Clear
5. Set Clock
6. Set Modem Options
7. Set Terminal Options
8. Set 485 Options
A. Display SS Alarm Block
B. PCMCIA Menu
P. Set New Password
X. Exit
Liebert RCM8 • 15