Lanier LD075 - Manual (Page 129)

Supplementary Specifications
121
6
• If the number of originals placed is less than the number specified for com-
bining, the last page is left blank, as shown in the illustration.
❖ ❖ ❖ ❖ Copying Book Originals
• The machine sets the reproduction ratio automatically to meet paper size
and copies originals together onto the paper.
• The machine uses ratios in the range of 25 to 400%
• If the calculated ratio is under the available minimum, it will be adjusted
to minimum ratio. However, with some ratios, parts of the image might
not be copied.
• Even if the direction of originals is different from that of the copy paper,
the machine will automatically rotate the image by 90°to make copies
properly.
• If you mix originals of different sizes or place originals in different orien-
tations, you cannot use this function.
• Four originals are copied onto each sheet of copy paper with this function.
If the number of originals scanned is less than a multiple of 4, the last page
will be blank.
• Copying to make a magazine may take some time after scanning originals.
• If the Booklet Finisher is installed and you select "Magazine" and "Staple
(Saddle Stitch)", copies are stacked, stapled at the center, folded in half au-
tomatically, and then delivered.
❖ ❖ ❖ ❖ Repeat
Depending on paper size, ratio, and orientation, parts of repeated images
may not be copied.
• If you use this function with "Custom Size Original", you can copy repeat-
edly the image in the area you want by specifying the vertical and horizon-
tal lengths from the base point. In this case, place your original on the
exposure glass.
⇒ p.16 “Placing Custom Size Originals”
1. Base point
2. Horizontal length
3. Vertical length
MartiniC1_GBcopy4_FM.book Page 121 Tuesday, April 23, 2002 6:23 PM