Lanier LD075 User Manual
Page 24
Placing Originals
16
1
CCCC
Align the rear and left edges of
originals as shown in the illustra-
tion.
1.
Place into the document feeder.
2.
Vertical size
DDDD
Adjust the guide to the widest
original size.
EEEE
Place aligned originals face up
into the document feeder.
FFFF
Press the
{{{{Start}}}} key.
Placing Custom Size Originals
When placing custom size originals in
the document feeder, specify the size
of the originals.
Note
❒ Paper that has a vertical length of
128–297 mm (5" – 11") and a hori-
zontal length of 128–1260 mm (5" –
49.6") can be placed with this func-
tion.
AAAA
Press the [Special Original] key.
BBBB
Press the [Custm Size Origi.] key.
CCCC
Enter the horizontal size of the
original with the Number keys,
and then press the [#] key.
Note
❒ If you make a mistake, press the
[Print Inquiry List]
or
{{{{Clear/Stop}}}}
key, and then enter the value
again.
DDDD
Enter the vertical size of the origi-
nal with the Number keys, and
then press the [#] key.
EEEE
Press the [OK] key.
FFFF
Place originals, and then press the
{{{{Start}}}} key.
B4 A3
1
2
CP19AE
MartiniC1_GBcopy4_FM.book Page 16 Tuesday, April 23, 2002 6:23 PM