Loewe Auro 2216 PS - Manual (Page 13)

13 -
First installation
Setting the loudspeaker system
The dialogs for selecting and setting your loudspeaker system are all in the
”Speaker System” window.
Selecting the speaker system
There is no disc in the drive and the drawer is closed or an
inserted DVD is in Stop mode.
The DVD menu is displayed.
Go to the item ”Settings”.
Press 4.
The ”Settings” window opens.
Go to the item ”Speaker System”.
Press 4.
The ”Speaker System” window opens.
DVD menu
Speaker System
Back
End
Info
System TREMO other
Connect speakers
Listener/Speaker distances
Adjust Loudspeaker Level
Select “Tremo” if you have connected 4 satellite speakers (also in Individual
Sound).
If you use  or 4 Individual Sound standing speakers, select “other”. This also
applies for connecting an active speaker system or a passive system of another
provider.
Press 34 and select “TREMO” or “other”.
Connect speakers
Note: This dialog is omitted, if you have selected ”Tremo” as the connected
speaker system.
If you have selected ”other” as a speaker system:
Go to the item ”Connect speakers”.
Press 4.
The ”Connect speakers” window opens.
DVD menu
Connect speakers
Back
End
Info
Front speakers small large
Surround speakers small
Centre speaker small
Subwoofer yes
Specify whether you have connected large or small front speak-
ers to Auro.
The Loewe Individual Sound S1 satellite speakers must be
logged in as “small”.
The Loewe Individual Sound L1 standing speakers must be
logged in as “large”.
In the graphic overview, you can check whether you have
logged in your speakers correctly.
Go to ”Surround speakers” and so on.
Note: Some speaker combinations cancel each other out.
Press the button.
The ”Connect speakers” window is closed. You are back in the
”Speaker System” window.