Loewe Auro 2216 PS - Manual (Page 37)

37 -
Tuner
Individual resorting
You can change the layout of the stations/program places at any time. You can
place your favorite station at program place 1, for example. Please note that the
station that was previously at program place 1 will be lost.
Select the station which is also to be stored at the new pro-
gram place (program place is copied).
or
Press the button on the device. Store
MEMORY lights up in the Auro display.
Select the number of the desired programme place with P+/- on
the remote control
MEMORY lights up and the number for the
new programme place flashes.
Press the button on the device. Store
This places this station at the newly selected program place,
MEMORY is hidden.
Switching tuner display
Press the button repeatedly. Either the RDS name or the station
frequency appears in the message line in the Auro display (see
page 5).
Manual station search
Press one of these buttons long.
The tuner searches for the next station with adequate reception
quality, with
forwards, with in reverse. As soon
as such a station is found, the search ends and the found sta-
tion is played.
TUNED lights in the display.
Fine tuning
Note: This function is only available for the FM range.
If the reception quality of the current station is unsatisfactory, you can adapt the
frequency in small steps.
Press one of these buttons short.
The frequency set on the tuner is changed in small steps (0.05
MHz), with
forwards, with in reverse.
Observe TUNED in the display. When it is alight, the reception
power is adequate. When it is hidden, the reception is too
weak for satisfactory playback.
Mono/Stereo switching
In the case of poor reception in the FM waveband, you can improve the listening
quality by switching over to mono:
Press the button.
The received station is played in mono,
STEREO is hidden in the
Auro display.
Switch stereo back on:
Press the button.
Playback is in stereo,
STEREO lights in the display.