Lightwave Communications 2X16 - Manual (Page 7)

Lightwave Communications PC ServerSwitch 2x16
www.lightwavecom.com Page 7 of 24
3.0 On-Screen Menus
On-screen Menus are used for two purposes:
•
Server Port selection for a Console
•
System setup programming for the PC ServerSwitch 2x16
On-Screen Menus are displayed on the User's monitor. Either Console may
administer the system, but only one user may edit the setup at a time.
NOTE: While in the on-screen menu mode, the "Caps Lock", "Num Lock", and
"Scroll Lock" LEDs will flash on the User Console’s keyboard.
Navigating the on-screen menus
•
Press both Control keys (Cntl-Cntl) to access the on-screen menus, or
press the Scroll Lock key twice
•
Up Arrow/Down Arrow
•
+ and - keys on number pad
•
Enter (select or scroll through options)
•
Esc to exit, or to back up one level
•
Most options have a single-character hot-select key, highlighted and
capitalized on the screen. Press that letter to select that option.
3.1 Main Menu
Pressing and releasing both CONTROL buttons (Ctrl-Ctrl) on either Console's
keyboard will bring up the main menu of the PC ServerSwitch 2x16.
Lightwave Communications Inc.
Curr: File Server 1
DPCSS
S ystem Setup
no A uto scan
J ump to port...
Disabled
File Server 1 1
File Server 2 2
Print Server 3
Email Server 4
Engineering 5
Enterprise 6
Firewall 7
Fax Server 8
N ext unit Esc exits
Note: This window will show the current server port (e.g., Curr: File Server 1).
Window color settings may be different than above.