Lok8u K8SLI - Manual (Page 40)

K8SLI
34
Onboard Device
If you highlight the “Onboard Device” label and then press the enter key, it will take you to a
submenu with the following options:
OnChip USB
This option should be enabled if your system has a USB port installed on the system board. You will
need to disable this feature if you add a higher performance controller.
Options: V1.1+V2.0 (default)、Disabled、V1.1
USB Memory Type
This item allows you to set your USB Memory Type
Options: SHADOW、Bast Memory(640k)(default)
USB Keyboard Support
This item allows you to enable the USB attached keyboards and storages.
Options: Disabled (default)、Enabled
AC97 Audio
This option allows you to control the onboard AC’97 audio.
Options: Enabled (default)、Disabled
MAC Lan
This option allows you to control the onboard LAN device.
Options: Enabled (default)、Disabled
Onboard I/O Chip Setup
If you highlight the “Onboard I/O Chip Setup” label and then press the enter key, it will take you to a
submenu with the following options:
Power On Function
This field allows you to select a way to power on your computer. Options: Password、Hot KEY、
Mouse Left、Mouse Right、Any KEY、BUTTON ONLY (default), and Keyboard 98
Hot Key Power ON
This field allows you to use the Ctrl key along with a hot key (function key) to power on your system.
This field is only configurable when “Power On Function” is set to “Hot Key”.
Options: Ctrl-F1、Ctrl-F2…… Ctrl-F12