Lucent Technologies MERLIN LEGEND 5 - Manual (Page 289)

MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
555-650-118
Issue 1
June 1997
Managing the System
Page 6-71 Assigning Allowed Lists to Extensions
6
8 lists for each telephone
NOTE:
If you program 0 as the first digit of a list entry, any toll restriction assigned
to the extension is removed for calls that can be placed by a toll operator.
Also, special characters (such as Pause) are not permitted in Allowed List
entries.
Task List: Revising Allowed Lists 6
o
Obtain Form 6e, Allowed Lists and, as appropriate, the form(s) for
individual telephones: Forms 4b, 4d, 4e, 4f, 5a, 5b, or 5c.
o
If necessary, read “Allowed/Disallowed Lists” in the Feature Reference for
detailed information about this feature.
o
Plan changes using the planning guidelines above; record the new values
on the form(s).
o
Open the System Programming menu from the console or a PC with SPM.
o
Program the change(s), following the instructions for “Allowed Lists” in the
“System Features” section of
System Programming, Chapter 3, or the
summary programming instructions below.
o
When you have finished, file the forms with the rest of the planning forms.
Programming Instructions 6
Assigning Allowed Lists to Extensions 6
Use this procedure to assign individual extensions to established Allowed Lists.
Planning Guidelines 6
More than one Allowed List can be assigned to an extension.
NOTE:
You can copy calling restrictions. See “Copy Call Restrictions” in Chapter 3
of
System Programming.
Console Procedure Tables
→
AllowList
→
Dial list no. and entry no.
→
Enter
→
Drop
→
Dial no.
→
Enter
→
Exit
PC Procedure
$
→

→
Type list no. and entry no.
→

→
3
+
0
→
Type no.
→

→
!