Connection – Lexicon CP-3 User Manual
Page 20
Advertising
16
Lexicon
Connecting the CP-3
in a Tape Monitor Loop
If you have a receiver with no external access to the preamplifier outputs,
you can use a tape output or external processor loop to the CP-3. However,
any change in the receiver’s volume control after the system is adjusted will
upset the balance between the main and auxiliary speakers.
Connection
*
In this configuration, use a Y-connector to hook the VCR to Video 1 as well if its tuner is
used instead of the TV tuner.
** In this configuration, select the TV's video input to see the CP-3's on-screen display.
Advertising