Lexicon CP-3 - Manual (Page 58)

57
CP-3 Digital Surround Processor
Specifications
6
Specifications
Inputs: Audio: 4 stereo pairs
Minimum Input Level: 300 mVrms for maximum output
35 mVrms for Dolby level
Input Impedance: 100 k Ω in parallel with 100pf
Video: 3 composite, NTSC M standard
Input Sensitivity and Impedance: 1V p-p, 75
Ω
Outputs: Audio: 8 outputs (Left, Right, Center, Subwoofer, 2 Side, 2 Rear)
Maximum Output Level: 6 Vrms
Output Impedance:
500 Ω
Video: 1 composite, NTSC M standard
Output Level and Impedance: 1V p-p, 75
Ω
Frequency Response: Unprocessed channels: 10 Hz - 100 kHz, +1, -3dB, Ref. 1 kHz
Processed channels: 10 Hz - 18 kHz, +1, -3dB, Ref. 1 kHz
Subwoofer: 10 Hz-80 Hz, +1, -6dB, Ref. 31.5Hz, 24dB/octave rolloff
THD: All channels: Less than .025% @1 kHz, max level
Subwoofer: Less than .025% @10-100 Hz, max level
Signal to Noise Ratio: 90dB minimum, A-weighted, Ref. 1 kHz max level
Power Requirements: 120 VAC +10% 50-60 Hz 35W
100/220/240 VAC versions available
3-pin IEC detachable power cord provided
Dimensions: 17.5"W x 14.5"D x 3.7"H (445 x 368 x 94mm)
Brackets supplied for rack mounting: conforms to 19" standard, 2U high
(3.5"H without feet)
Weight: 18 lbs. 4oz. (8.3kg)
Environment: Operating Temperature: 32° to 95°F (0° to 35°C)
Storage Temperature: -22° to 167°F (-30° to 75°)
Humidity: 95% maximum without condensation
Remote Controls: 2 hand-held, battery-powered remote control units provided
with each CP-3; each uses 2 AA batteries (provided):
1 18-button "Standard" remote
1 36-button "Expanded" remote
Specifications subject to change without notice.
S
pecifications