Lowrance electronic LHR-80 - Manual (Page 29)

Lowrance - LHR-80 Installation and Operation Instructions 29
4-2-2 Edit a waypoint
WP EDIT
FISH 2
12
0
32.2332’N
132 0 45.6512’W
MENU SELECT
>WAYPOINT
BACKLIGHT
LAMP
WAYPOINT
>WP LIST
WP LIST
NEW WP
FISH 1
> FISH 2
WP EDIT
MOOR 1
12
0
32.2332’N
132 0 45.6512’W
SAVE
MOOR1
>YES
NO
Hold down CALL MENU (US only); or press MENU (EU only). 1.
The cursor is at WAYPOINT. Press ENTER. 2.
Select WP LIST, then push ENTER, the cursor is at new WP. 3. Scroll down to the waypoint you
want to edit then push ENTER.
Select WP EDIT and press ENTER. 4.
The waypoint details are displayed and the cursor is positioned at the first character of 5.
the name.
Use the CH 6. / to change the first character of the waypoint name then press ENTER,
or just press ENTER to skip to the next character.
When you reach the last character of the waypoint name, make any changes if neces-
sary, then press ENTER to move the cursor to the waypoint icon.
Note: If you do not want to change the waypoint name waypoint icon, press ENTER repeat-
edly until the cursor moves to the latitude.
To change the waypoint icon, use the CH / to change the icon or press ENTER to skip to
latitude. To change latitude, use the CH / to change the first digit or press ENTER to skip
to the next digit. Repeat if necessary. When you reach the last digit, push ENTER to move the
cursor to longitude.
Note: If you do not want to change the latitude, press ENTER repeatedly until the cursor
moves to the longitude.
Repeat the previous step to change or press ENTER to continue. 1.
A new screen appears. Press ENTER if you want to STORE the new waypoint. If you want 2.
to keep the original entry, move the cursor to NO then press ENTER.