Lowrance electronic LHR-80 - Manual (Page 47)

Lowrance - LHR-80 Installation and Operation Instructions 47
4-11 Track Log
Set the distance internal to 25m, 50m, or 100m for recording the track points when driving.
MENU SELECT
DSC SETUP
GET BUDDY
>TRACK LOG
TRACK LOG
25M
>50M
100M
1. Select TRACK LOG, then press ENTER, the 25m, 50m, 100m appear on the screen.
2. Select your desired and press ENTER to confirm.
4-12 Erase Track
Erase the track history line by this menu. So the track line will disappear on the plotter mode’s
screen.
MENU SELECT
GET BUDDY
TRACK LOG
>ERASE TRACK
ERASE TRACK
YES
>NO
Select ERASE TRACK, then press ENTER, the radio asks for confirmation. 1.
Select Yes, then press ENTER to erase the track line of the plotter screen. 2.
4-13 Reset (Reset to factory defaults)
Use RESET to return every setting on the radio to the factory defaults, except your MMSI,
Group MMSIs and ATIS MMSI.
MENU SELECT
TRACK LOG
ERASE TRACK
> RESET
RESET RADIO
ARE YOU SURE
>YES
NO
MENU SELECT
DSC SETUP
GET BUDDY
> RESET
Select RESET, press ENTER, the radios asks for confirmation. 1.
Select yes, press ENTER to reset the radio and return to the menu. 2.