L-3 Communications X200xp - Manual (Page 13)

13
Batteries
⇒ When replacing batteries, always replace BOTH batteries.
Mixing a fresh battery with a partially discharged battery is
potentially hazardous.
⇒ Never mix battery types (Alkaline, rechargeable, Lithium,
etc). Both batteries must be of the same type.
⇒ Remove batteries if the camera is to be stored for extended
periods (2 weeks or more).
⇒ Always follow the battery manufacturers’ directions for proper
disposal of batteries.
•
Turning on the Power
Switch on the on/off knob
Turn the on/off dial knob
Clockwise to turn on the camera
Camera Warm-Up
The camera requires approximately 3 seconds of warm-up time.
During these 1
st 3 seconds after the camera is switched on, a logo
will appear in the Display. After 3 seconds have passed, the logo
will disappear, and video of the thermal scene will begin.
Camera Shutter
To maintain an optimum Thermal Image, the X200xp will
automatically shutter. During this shutter, the video will freeze for
approximately ½ second, and a faint “click” sound may be heard
inside the camera. Shuttering will occur in the 1
st 4 minutes after
turning on the camera at 30-second intervals. Otherwise, the