L-3 Communications X200xp - Manual (Page 22)

22
•
Trouble Shooting Guide
Problem Possible Cause Possible Remedy
After waiting
the 3 seconds of
warm up, the
video does not
appear, but the
logo keeps
flashing Low Battery
Power Replace Batteries
The LCD Display
Brightness is too
low Adjust the display
brightness by
turning the
on/switch clockwise
Batteries are
completely
discharged Replace Batteries
No Image in the
LCD display (no
logo, no battery
icon, and no
video)
The optional video
cable is connected Disconnect the
optional video cable
The Battery
Gauge shows
empty
The Batteries are
very near the end
of their charge. Replace Batteries