Lexicon 960L - Manual (Page 28)

960L Owner’s Maunal Basic Operations
To enter Name or Information:
• Using the LARC2, use the Increment/Decrement
(+/-) keys to scroll between character positions in
the Name or Information display and the
Navigation Arrows to select the desired character
from the matrix below, then press the ENTER key
to finalize your selection.
• If you have a PS/2 keyboard connected to the
AUX port on the LARC2’s rear panel, you can type
in names and info. It is recommended that you
connect the keyboard before power is applied to
the 960L.
Names of Registers and Register Banks can be up to
16 characters long. Information displays for Registers
can hold 150 characters and Information displays for
Banks can hold 100 characters.
A Quick Guide to Operation,
Continued
3-7
Figure 3-8 — Name screen; Info screens are similar.
Remove
All Text
Delete the
character to
the left of the
cursor
Toggle between INSERT (put
in the selected character,
moving the text to make room)
and WRT OVR (replace the
character under the cursor
with the selected character)
Go to the
beginning
of the text
Go to the end
of the text
Go back to the
basic Register
Info page