Lexicon 960L - Manual (Page 36)

960L Owner’s Maunal Operations in Detail
Note: As shown in these tables, AES inputs (and outputs) have two channels per physical connection. On the
back panel, these are labeled 1-2, 3-4, etc. The assignment of the two channels conforms to AES conventions,
that is, the odd-numbered channels will always be the left channel of that AES stereo pair, and the even-
numbered channels will always be the right.
Control Mode: Clocks, Configuration, and System Screens,
continued
4-5
Stereo 44.1/48kHz Configurations (the DSP card is divided into 4 stereo machines).
Input Assignment 1 Left 1 Right 2 Left 2 Right 3 Left 3 Right 4 Left 4 Right
Analog Input Channel 1 2 3 4 5 6 7 8
AES Input Channel 1 (L) 2 (R) 3 (L) 4 (R) 5 (L) 6 (R) 7 (L) 8 (R)
Output Assignment 1 Left 1 Right 2 Left 2 Right 3 Left 3 Right 4 Left 4 Right
Analog Output Channel 1 2 3 4 5 6 7 8
AES Output Channel 1 (L) 2 (R) 3 (L) 4 (R) 5 (L) 6 (R) 7 (L) 8 (R)
Figure 4-6 — Stereo configuration for 88.2/96 kHz sample rate; two machines available
Stereo 88.2/96 kHz Configurations (the card is divided into 2 stereo machines)
Input Assignment 1 Left 1 Right 2 Left 2 Right Unused Unused Unused Unused
Analog Input Channel 1 2 3 4 5 6 7 8
AES Input Channel 1 (L) 2 (R) 3 (L) 4 (R) 5 (L) 6 (R) 7 (L) 8 (R)
Output Assignment 1 Left 1 Right 2 Left 2 Right Unused Unused Unused Unused
Analog Output Channel 1 2 3 4 5 6 7 8
AES Output Channel 1 (L) 2 (R) 3 (L) 4 (R) 5 (L) 6 (R) 7 (L) 8 (R)