Lyngdorf Audio TDA 2200 - Manual (Page 13)

13
MIC IN(left) / TRIGGER OUT(right) (12)
DC Trigger out for remote start of SDA 2175 power amplifiers or similar equipment.
Mic. in for connection of RoomPerfect™ microphone.
RS232 INPUT/AUX (13)
RS232 communication connectors for communication with a PC, remote control from
Lyngdorf equipment with broadcast commands or linked control between amplifiers. Input
is looped to Aux out for daisy-chaining of amplifiers. The “INPUT” is used for connection to
a PC for software update, or as a control input from a Lyngdorf Master Amplifier. The
“AUX” connection is output in Master mode for controlling slave amplifiers, or bypasses
input from other master amplifiers to the next amplifier.
MAINS INPUT (14)
7. Remote Control
The remote control is used to access the menu system and replicate the buttons directly
accessible on the front panel. The buttons are as follows:-
The four buttons used for selecting which device to control are described below. To control
the TDA 2200 the AMP key should be pressed [please note the amplifier’s volume and
mute buttons still work when in CD mode].
• AMP – Selects the remote for operation with a Lyngdorf
Amplifier.
• RCS – No function.
• CD - Selects the remote for operation with a Lyngdorf CD
Player.
• Tuner – No function.
• Standby – The standby button toggles the TDA 2200 between
active and stand-by mode
• Digital – Changes to Digital input, or if already selected, cycles
to the next Digital input.
• Analog – Changes to Analog input, or if already selected,
cycles to the next Analog input.
• The numerical button 0 selects bypass listening mode (no
room correction filter selected)
• The numerical buttons 1-8 select focus listening mode (up to 8
different listening positions can be stored in RoomPerfect™)
• The numerical button 9 selects global listening mode.
• Info – shows the firmware version of TDA 2200
• Menu – activates or de-activates the Menu system on the
Main display
• Up / Down / Left / Right arrows – Navigation in the menu
system.
• Left / Right arrows – Toggles between voicing filters.
• Enter – Selection in menu system
• Channel -/+ - toggles down/up between inputs
• Volume Up/down – changes volume in the chosen direction
• Mute – Toggles Mute function on/off