Lexicon BD-30 - Manual (Page 25)

BD-30 Blu-ray Disc Player
21
Custom Installation
External IR (Infrared Remote) Installation
The Lexicon BD-30 Blu-Ray Disc Player features IR IN and IR OUT ports on its back panel. If the player is to be installed in an equipment
cabinet where direct line-of-sight is not available for remote control, your custom home theater installer can purchase an External IR Remote
Sensor and plug it into the IR IN port. Place the sensor head at a location where there is direct line-of-sight to ensure reliable operation.
If you have another Lexicon device that features an IR IN port, the IR OUT port on the BD-30 can pass through remote control signal to the
next Lexicon device.
Note
• Lexicon cannot guarantee that the IR IN and IR OUT ports will be
compatible with all devices.
• Connecting the IR IN or IR OUT port to an incompatible device
may result in damage to the connected device or the player.
• Please contact Lexicon customer support if you plan to integrate the
player into an IR distribution system. Customer support can provide
recommendations on how to properly connect the control signals.
Installation
Lexicon MC-12HD Back Panel
IR Sensor BD-30 Back Panel
3.5mm Stereo Cable
IR IN Signal Identifications
Tip: +5V from the player
Ring: IR carrier signal
Sleeve: Ground
3.5mm stereo plug