Lexicon BD-30 - Manual (Page 61)

BD-30 Blu-ray Disc Player
57
• On – The video screen will be split in half. The left side
demonstrates the result of the VRS ™ video processing,
and the right side shows video without the help of VRS
video processing.
• Off – Normal viewing mode.
• A/V Sync – To add a delay to the HDMI audio output. If
you experience an audio/video synchronization problem,
you may use this option to add a slight delay to the audio
so it is synchronized to the video.
• Use the UP/DOWN ARROW buttons to highlight the A/V
Sync menu item. Press the ENTER button.
• Press the LEFT/RIGHT ARROW buttons to adjust delay.
The audio delay can be adjusted in 10ms steps.
• Press the ENTER button to confirm the new A/V Sync
setting and return to the Audio Processing Setup Menu.
9. Screen Saver: To turn on/off the screen saver function. The
screen saver is designed to minimize burn-in concerns for
plasma and CRT display devices. The available options are:
• On – After about 3 minutes of inactivity, the player will
show an animated Lexicon logo moving on a black
background. This allows most areas of the screen to rest
and gives all areas an equal opportunity to refresh.
• Off – The screen saver will not be activated. Use this
option if your TV does not have a burn-in issue.
• Energy Saver – Video output will be turned off after
3 minutes of inactivity. Many projectors and LCD TVs
will go into a standby or sleep mode and turn off their
projection lamp or LCD backlight lamp, thus saving energy
and prolonging the lamp life. When you press any button
on the Lexicon remote control or the player’s front panel,
the screen saver will be cancelled and video output will be
restored. If your TV is already in standby or sleep mode,
you may need to wake up the TV by pressing a button on
its remote or control panel.
Picture Adjustment
Picture Adjustment is a special section of the Video Setup menu. It
allows you to fine-tune many picture control parameters in order
to achieve the optimal picture quality and visual result. To use
Picture Adjustment, press the SETUP button on the remote control
to enter the player’s Setup Menu, and then choose “Video Setup”
– “Picture Adjustment”. The Setup Menu will be replaced by the
Picture Adjustment menu:
To change a picture adjustment parameter, use the UP/DOWN
ARROW buttons to highlight the parameter, and use the LEFT/
RIGHT ARROW buttons to change its value.
To aid in the adjustment of picture control parameters, the picture
adjustment menu will be reduced to only show the parameter
being adjusted once you press the LEFT/RIGHT ARROW buttons.
The reduced menu will be positioned near the bottom of
the screen.
Brightness 0 -16 +16
Setup Menu Options
Picture Mode
Brightness
Contrast
Hue (Analog)
Saturation
Detail Enhancement
Edge Enhancement
Noise Reduction
Y/C Delay
Border Level
0
0
0
0
0
0
0
0
0
-16
-16
-16
-16
-16
-16
0
-16
0
+16
+16
+16
+16
+16
+16
+8
+16
+16
Exit
Normal