Lifescan SureStep Blood Glucose Monitor - Manual (Page 26)

1. Press the blue power button to turn on
the meter. The display check appears
briefly. Carefully check that all symbols
appear. Make sure a test strip is not in
the meter when you turn it on.
2. Compare the code number on the meter
display with the code number on the
test strip bottle. If they do not match,
press the green
C button until the codes
match.
3. Remove a test strip from the bottle and
replace the bottle cap. Close it tightly.
◆ Check the expiration date and discard
date. Do not use the test strips after
these dates.
◆ Compare the color of the confirmation
dot on the test strip with the “Unused”
color dot shown on the Color Chart on
the test strip bottle label. If the color of
the confirmation dot on the test strip is
darker than that shown on the Color
Chart, do not use the test strip. The
result may be inaccurate.
CHECKING
16
Green C Button
▼
(Example)
DCO_05074503A_OT_SS_OB_US 6/19/03 11:59 AM Page 16