Lantronix EDS Device Servers EDS16PR User Manual
Page 78
8: Services Settings
EDS Device Servers User Guide
78
SNMP Page
SNMP Page Settings Description
SNMP Agent
Select whether SNMP is enabled. Choices are:
On = SNMP is enabled. (default)
Off = SNMP is disabled.
Read Community
Enter the case-sensitive community name from which the
EDS will receive trap messages. Default is public. For
security, the read community name displays as <Configured>
to show that one is enabled.
Write Community
Enter the case-sensitive community name to which the EDS
will send trap messages. Default is private. For security, the
write community name displays as <Configured> to show that
one is enabled.
System Contact
Enter the name of the system contact. No contact is
configured by default.
System Name
Enter the EDS’s name.
System Description
Enter a system description for the EDS.
System Location
Enter the geographic location of the EDS. No location is
configured by default.
Enable Traps
Select whether SNMP cold start trap messages are enabled
at boot. Choices are:
On = SNMP cold start trap messages are enabled at boot
time. (default)
Off = SNMP traps are disabled.
Primary TrapDest IP
Enter the primary SNMP trap host. None set by default.
Secondary TrapDest IP
Enter the secondary SNMP trap host. None set by default.