Battery charger leds – Lucent Technologies MDW 9031 User Manual

Page 9

Advertising
background image

MDW 9031/9031DCP Wireless Pocket Phone Quick Reference

503-801-165

Quick

Reference

Issue 2 February 1999

5

Battery Charger LEDs

The color of the battery charger’s LEDs indicates the state of the
corresponding battery pack, as shown in the following table:

Battery
charger LED
shows...

If it is the
SPARE LED,
the battery
pack in the
Spare battery
compartment...

If it is the
HANDSET
LED, the
battery pack
in the
Handset...

If it is the
REFRESH LED,
the Refresh
button was
pressed, and
the Handset
battery pack...

Steady orange

Is charging

Is charging

N/A

Steady green

Is fully charged

Is fully charged

N/A

Flashing red

See Note
below.

Has one of the
following
problems...

Is not seated
properly in the
charger

Has dirty
contacts

Is defective

Has one of the
following
problems...

Is not
seated
properly in
the charger

Has dirty
contacts

Is defective

N/A

Steady red

Is in the Discharge
portion of the
Refresh cycle.

Is in the
Discharge
portion of the
Refresh cycle.

Is in the
Discharge portion
of the Refresh
cycle.

Note:

If either the SPARE LED or the HANDSET LED is flashing
red, both battery packs must be removed from the charger to
clear the flashing-red condition. Address the possible
problems for one battery pack at a time to determine whether
one is bad.

Advertising