Linksys WVC54GCA - Manual (Page 20)

Chapter 4
Installing and Using the Camera Utility
19 Wireless-G Internet Home Monitoring Camera
Instant Recording Time Limit
Maximum Time Limit for Instant Recording This is the
maximum length of a recording that is started by clicking
the Record button on the Monitor window. The default is
10 min.
Motion Detection
The following two settings apply only if the Motion
Detection Recording feature is enabled.
Record before motion detected • This is the length of
time prior to the detection of motion that will be saved
with the recording. Having this additional footage can
help to show the motion more clearly when it occurs.
Record after motion detected • This is the length
of time that the Camera will continue to record after
motion is detected.
Disk Allocation for Each Camera Recording
Total Disk Space This is the total amount of storage
space on your PC’s hard drive.
Available Disk Space This is the total amount of
remaining storage space on your PC’s hard drive.
Enable Diskspace Limitation If you want to limit the
amount of disk space used by each Camera, check this
box, then fill in the fields below.
Maximum allowed space per camera • Enter the
maximum allowed space per camera in MB. The default
is 1000 MB.
When allowed space is full • Select the action to take
when the space limit is reached, either Overwrite
earliest file (default), or Stop recording.
Initial Settings
Launch this Utility when Windows started Check this
box if you want to have this utility started automatically
whenever Windows is started.
Click Save to save any settings you have changed on the
screen, or click Exit to exit without saving your changes.
Click Help to display help information.
If you want to use the Camera’s Web-based Utility, go
to “Chapter 4: Advanced Configuration with the Web-
Based Utility.”