Linksys WVC54GCA - Manual (Page 7)

Chapter 3
Setting Up and Mounting the Camera
6 Wireless-G Internet Home Monitoring Camera
Chapter 3:
Setting Up and Mounting
the Camera
Setup Wizard
The Wireless-G Internet Home Monitoring Camera Setup
Wizard will guide you through the installation and
configuration procedure.
Insert the Setup CD-ROM into your CD-ROM drive. 1.
The Setup Wizard should run automatically, and the
Welcome screen should appear. If not, click Start,
then select Run, and then in the field provided, enter
D:\SetupWizard.exe (if “D” is the letter of your CD-
ROM drive).
Setup Wizard - Welcome Screen
Click Next, then click Click Here to Start to continue.
The Setup Wizard displays the following options. 2.
Setup Camera • Click this to begin the installation
process.
Install Camera Utility • Click this to install the Camera
Utility on your PC.
User Guide • Click this to open the PDF file of this User
Guide.
Exit • Click this to exit the Setup Wizard.
To install the Camera, click Setup Camera.
On the 3. End User License Agreement screen, check the
box next to I accept the agreement and click Next
if you agree and want to continue the installation, or
click Exit to end the installation.
End User License Agreement
Connect the included network cable to your network 4.
router or switch. Click Next.
Connect Network Cable to the Switch or Router
Connect the other end of the network cable to the 5.
Camera’s Ethernet port. Click Next.
Connect Network Cable to the Camera