Lanier 5227 - Manual (Page 46)

Netware 4.x, 5- Advanced Settings
4 - 12 NetWare Configuration
5
Select the IPX address of the Network Interface Card which is to be configured by clicking
it, and click [Next].
Note: If you don't know which Network Interface Card you are configuring, print
the Configuration Page using the printer's operation panel, and select the MAC
address that is on the page.
6
Confirm that the MAC and IPX addresses are correct, and click [Finish].
•
[NIC Setup Tool] window appears.
7
Click [Configure].
•
The property sheet appears.
8
Click the [NetWare] tab, and make the following settings.
•
In the [Print Server Name] box, enter the name of the print server.
•
In the [File Server Name] box, enter the name of the file server in which a print
server is to be created.Clicking [Browse], you can select a file server among
those listed in the Browse dialog.
•
In the [NDS Context] box, enter the context in which the print server is to be
created. Clicking [Browse], you can select a context among those listed in the
Browse dialog.
•
Object names must be enter from a lower level and divided by a period. For
example, if you want to create a file server into NETWORK under DS, enter
“NETWORK. DS”.
•
In the [Print Server Operation Mode] group, click [As Print Server].
•
Click [OK] to close the property sheet.
•
After a confirmation dialog appears, click [OK].
9
In the [NIC] menu, click [Exit] to exit the NIC Setup Tool.
10
From Windows, run NWAdmin.
•
The actual NWAdmin programs differ depending on the version of it and that of
the operating system. Run the NWADMIN.EXE except the following cases.
When you are using the NetWare 4.11 or higher on Windows 3.1x, run the
NWADMN3X.EXE. When you are using the IntranetWare on Windows95/98,
run the NWADMN95.EXE. When you are using the Net-Ware 5, run the
NWADMN32.EXE.
•
The NWAdmin programs are located in the PUBLIC directory in the SYS
volume. The NWADMN95.EXE is located in the PUBLIC\WIN95
directory.The NWADMN32.EXE is located in the PUBLIC\WIN32 directory.